| Materials and Dimensions |
Standard |
| Ductile
Iron |
|
| Cement-Mortar
Lining for Ductile-Iron Pipe and Fittings |
AWWA C104/A21.4 |
| Polyethylene
Encasement for Ductile-Iron Pipe Systems |
AWWA C105/A21.5 |
| Rubber-Gasket
Joints for Ductile-Iron Pressure Pipe and Fittings |
AWWA C111/A21.11 |
| Flanged
Ductile-Iron Pipe with Ductile-Iron or Gray-Iron Threaded Flanges |
AWWA C115/A21.15 |
| Thickness
Design of Ductile-Iron Pipe |
AWWA C150/A21.50 |
| Standard
for the Installation of Ductile Iron Water Mains and Their Appurtenances |
AWWA C600 |
| Concrete |
|
| Reinforced
Concrete Pressure Pipe, Steel-Cylinder Type |
AWWA C300 |
| Prestressed
Concrete Pressure Pipe, Steel-Cylinder Type |
AWWA C301 |
| Reinforced
Concrete Pressure Pipe, Non-Cylinder Type |
AWWA C302 |
| Reinforced
Concrete Pressure Pipe, Steel-Cylinder Type, Pretensioned |
AWWA C303 |
| Cement-Mortar
Lining of Water Pipe Lines in Place, 4 in. (100 mm) and Larger |
AWWA C602 |
| Plastic |
|
| Polyvinyl
Chloride (PVC) Pressure Pipe, 4 in. Through 12 in. (100 mm Through 300 mm),
for Water Transmission and Distribution |
AWWA C900 |
| Polyvinyl
Chloride (PVC) Pressure Pipe and Fabricated Fittings, 14 in. Through 48 in.
(350 mm Through 1200 mm), for Water Transmission and Distribution |
AWWA C905 |
| Polythylene
(PE) Pressure Pipe and Fittings, 4 in. (100 mm) Through 63 in. (1575 mn) for
Waterworks |
AWWA C906 |
| Molecularly
Oriented Polyvinyl Chloride (PVCO), 4 in. Through 24 in. (100 mm Through 600
mm) for Water, Wastewater, and Reclaimed Water Service |
AWWA C909 |
| Brass |
|
| Specification
for Seamless Red Brass Pipe, Standard Sizes |
ASTM B43 |
| Copper |
|
| Specification
for Seamless Copper Tube |
ASTM B75/B75M |
| Specification
for Seamless Copper Water Tube |
ASTM B88 |
| Requirements
for Wrought Seamless Copper and Copper-Alloy Tube |
ASTM B251 |
| Stainless
Steel |
|
| Standard
Specification for Seamless, Welded, and Heavily Cold Worked Austenitic
Stainless Steel Pipe |
ASTM A312/312M |